You can use a hammer and a pry. One of the major problems are loud pops and cracks that will eventually surface when you walk across due to pockets of air beneath the surface as a result of the uneven subfloor.
Laminate flooring on an uneven floor will cause many problems.
Laminate flooring over concrete subfloor. Since laminate is a floating floor installation, areas of peaks and lows can interfere with the stability of the locking system and joints. However, if you leave the floor uneven before laying the laminate, there will be many issues with the quality of your laminate flooring. In some instances, you might be able to install your flooring over an existing floor, but it is important to check prior to installation if it is a suitable material.
Laminate is installed by laying interlocking sheets over the floor beneath, which is known as the subfloor. How to install laminate flooring over concrete. You can lay laminate planks over various concrete surfaces, including on a concrete basement, on a concrete subfloor, or concrete stairs/steps.
Laminate flooring can be installed over concrete, wood or carpet subfloor or other surfaces. It can’t have any rough spots or dented areas. For that remove the baseboards using proper tools.
Installing laminate flooring on concrete steps. The surface on which you are going to install laminate must be perfectly even. Wood and concrete are the idea subfloors.
Installation of good quality underlayment is highly recommended. Like other flooring materials that work well over concrete slabs, laminate uses layers to fight moisture. When installing laminate flooring over concrete, it is also important to inspect the levelness and surface.
When it comes to solid wood, both strip and plank flooring are acceptable as long as they are in good condition. You will lay the flooring lengthwise to this wall. So, first of all, you need to start with preparing concrete floor for laminate.
Measure and mark the center of all four walls at floor level. So let me walk you through the steps we took to prepare our concrete floor for underlayment. Laminate flooring is a popular flooring option because of its attractiveness, durability, scratch resistance and, most importantly, its ease of installation.
If you have a weak subfloor that flexes up and down when walked on i would recommended adding an additional layer of 3/8 or 1/2 inch thick plywood underlayment glued and screwed down over a 5/8 or. This makes it a reliable option to install over your concrete slab. If you plan to transform your basement into a high traffic area for entertaining and relaxing, laminate could be a great option.
The main issue with plywood is the time it takes to acclimatize , and the extra time required to fit the plywood correctly. Snap the chalk line over the top of the concrete or moisture barrier between the marks on opposite walls making a cross in the center of the room. Laminate flooring cannot ever be installed on a subfloor made of carpet or padding.
These sheets are not attached to the subfloor, but simply rest on top of it. Padding can be used with most floating laminate floor installation. The first thing you want to do before you even buy the laminate flooring is prep the slab itself.
If you put laminate over an uneven surface, it will shift and move as you walk on it. We discuss the proper process for doing the same in the section below, as well as a guideline on how flat your concrete floor should be before laying laminate flooring over it. We installed laminate flooring through 80% of our home (which has an old, uneven concrete subfloor).
The laminate floor padding cost is $0.12 to $0.15 (12 to 15 cents) per square foot. A particleboard subfloor is not recommended for a concrete finished floor. Let’s get onto the main topic of how you can actually install the flooring over concrete right below.
Laminates can be laid down on almost all subfloors with minimal preparations, which is why many homeowners tackle its installation as a diy project. Installing underlayment is easy but it has to be done precise to avoid any tears. Laminate flooring, which can only be installed using the floating method, can be installed over a plywood subfloor (over the recommended foam pad).
Fitting a plywood subfloor is arguably the best way to ensure your laminate flooring (or virtually any other flooring you wish to lay) is fitted to the very highest standard. Laminate flooring installation over concrete. To install underlayment for laminate flooring on concrete, you need to: