See typical tasks and time to strip and wax floor, along with per unit costs and material requirements. Allow the solution to sit on the floor for a couple of minutes.
Get fair costs for your specific project requirements.
How to strip and wax a vct floor. We work with residents and business owners throughout buffalo, ny and now rochester, ny. This allows you to work comfortably and not overstretch. • using floor machine and appropriate stripping pad, strip the area allowing the machine time to work generating a residue that should be removed before it dries.
Our floor finish will give your floors a deep, rich protective glow. Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350) Provides commercial vct & tile cleaning service in raleigh, durham, cary, apex, chapel hill and surrounding areas of north carolina.
Rinse free stripper to minimize worry from thorough rinsing. In some cases a sealer can be applied but not recommended and when it comes to the next strip job it can be very hard and costly to remove. If you are seeking a strip and wax of your vct floor then below are five helpful tips to be aware of:
Caution since the floor can be very slippery during this time. Extra care needs to be used in these areas. By stripping the floors, we will remove all of the dirt and grime, leaving the floors bare.
Choose the best stripper for your floor type. See professionally prepared estimates for floor stripping and waxing work. Little dirt particles and dust inevitably get into your waxed floors and over time the floor will begin to yellow.
How to strip and wax vinyl (vct) floors: Our strip and wax process Make sure the right equipment is being used.
Low odor stripper to minimize odor in the building. This is where we will remove the top coating of wax and any other buildup. Dip your mop often into the wax so that it remains saturated during application.
Dip a clean mop into the wax. Decide which type of stripper you want to use. Floor waxing and vct stripping can make an old floor look like new.
This is part of a first impression that can mean a lot. Here are 10 steps to strip and wax your floors. At extreme carpet & tile clean, we can strip, seal, and wax your vct floor to restore its original beauty.
Clempire janitorial’s strip and wax service ensures that the floor is stripped and the floor is clean before waxing to ensure the most brilliant shine. • carefully inspect floor to determine if all finish has been removed. Shiny floors help customers feel your business is well maintained and cared for.
Strip old wax from vinyl with dishwasher detergent and ammonia. And as we always say “ all we leave behind is sparkle and shine.”. If so, proceed to other areas.
Stripping and waxing the floor. Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot. When this happens it is time to strip the old wax finish and apply a new coat of wax to the flooring.
Your vct floor should not be a testing environment. Not all floors are created equal. Use smooth strokes that overlap, as you work from side to side.
Stripping vct tile requires that you use a corrosive chemical that strips the wax from the floor surface to the bare floor. Stripping your floors cleans them thoroughly in preparation for adding a wax sealant. Regular stripper with high ph:
At the cleaning supply mart, we make it our mission to provide you with all of the professional cleaning supplies you need to get the job done, and the necessary. Make sure the company hired has not just the knowledge, but also the trained experience to strip and wax vct floors. Allow the solution to set on.
At servicemaster, we can refinish floors at night and on weekends so as not to disrupt business operations. We’ll apply a premium, durable wax that will dry within hours so you can start using your floor again. Areas that may suffer damage are protected with plastic sheeting and blue delicate surface tape.
Not only does this make your flooring shine, but it more importantly protects it. Soak up excess liquid with rags or the mop. Taking the time to strip your vct flooring can improve the way it looks.
Remove the floor finish stripper. Apply the wax onto the floor in small sections. Stripping improves your vct flooring.
Vct & tile cleaning and stripping & waxing. When stripping vct the wax will come off in layers so the floor will need to be stripped more than once. Fill a bucket with vct floor wax.
Our floor stripping and waxing services are completed in three steps. Before stripping the floor the area being serviced should be checked for stripper sensitive surfaces.