• masonry floors • warehouses • building exteriors. The best way to clean a large floor, or even a small one, is a floor scrubber.
*reduction of surface tension will result in imbedded soils ‘wicking’ to surface.
Automatic floor scrubber solution concentrate. (save 22%) 12 quarts per case. Designed for use in floor scrubbing machines and pressure washers ideal for removing soil from smoke and fire damage, it contains special optical brighteners to brighten surfaces as it cleans. Ideal for use in pressure washers.
Contains optical brighteners to brighten surfaces as it cleans. For industrial floor cleaning, use 4 to 6 ounces per gallon of water. Intensive cleaning (rotary floor machine/automatic scrubber):
The automatic scrubber squeegees from brushtec are designed to fit onto a variety of automatic cleaning machines. The front blade allows solution on the floor to pass through channels or notches in. Of scrub soap in the floor scrubber solution tank is recommended, dilute with water, scrub and vacuum up in the same.
After cleaning, rinse the floor thoroughly with water. Will not damage floor finishes. When scrubbing a single pass on floors that require light cleaning, about 1 gal.
Allow to act, then scrub. Distribute the cleaning solution on the floor surface. The floor evenly along the length of the squeegee assembly to ensure a good seal to maintain vacuum and maximise and concentrate the airflow.
Effectively deep cleans prior to recoating. 5gal lavender zep professional® automatic floor scrubber solution concentrate. This is a concentrated floor cleaner.
1 case, which is 12 quarts. For general cleaning, use 2 to 3 ounces per gallon of water. Cleaner for automatic scrubbers/ industrial cleaning.
It has a very economical cost, and the low ph minimizes the need for multiple rinses. Into the floor scrubber solution tank and fill the rest of the tank with water. To reduce static buildup, use staticide concentrate floor cleaner in an automatic floor scrubber.
But this brings up the question of what type of cleaning solution should be used so that the machine works to its fullest potential. When using with automatic tennant floor scrubber machine pump 1 gal. Apply with an automatic floor scrubber or mop at recommended dilutions.
This corded electric unit, operates in forward and reverse, with dual 16″ cylindrical brushes and a 16” scrubbing path at 1,100 rpms. When using a floor scru It simultaneously scrubs and picks up small debris.
Thanks to the high cleaning performance, the product quickly dissolves industrial dirt, oil and grease and allows for a fast. Changing the brush is easy. The br 16/3 puts the power of automatic scrubbing in a compact package ready for virtually any hard floor surface.
Allow 3 to 5 minutes contact time for heavily soiled surfaces before mopping clean. It successfully removes dirt and grime and sucks up all the dirty water in one pass. Removes soils from smoke and fire damage.
Cleaning approximately 4,306 square feet per hour, your small and congested spaces are clean. Formulated for scrubbing before recoating as well as cleaning before burnishing and daily cleaning. Scrub with stiff bristle push broom or automatic floor scrubber.
Industrial floor cleaner for scrubber driers.